Serving Houston, inside Loop 610 and out
Free Estimates (713) 828-3097
Our Services

Electrical Services in Houston, TX

Electrical Services · Houston, TX

Complete Electrical Services for Houston Homes

VCS Construction and Remodeling provides complete electrical services for Houston homes. We have contracted here since 2007, with electricians on the team and our own crew for the finish work. The work runs from a single new outlet to a whole house rewire. Estimates are free, and the number is (713) 828-3097.

Electrical work in an older home usually means opening walls, and that is where we differ from an electrical-only outfit. Our electricians run the wiring, and the same company patches the sheetrock, matches the texture, and paints. For breaker boxes and service upgrades, see our electrical panel replacement page. This page covers the wiring side: rewiring, outlets, switches, and fixtures.

What We Handle

  • House rewiring for older Houston homes
  • New outlets and switch wiring
  • GFCI outlets in kitchens, baths, and outdoors
  • Light fixture and ceiling fan installation
  • Recessed and undercabinet lighting
  • New circuits for appliances and equipment
  • Standby generator and transfer switch installs
  • Underground electrical service runs
  • Drywall patched and painted after the work

Free Electrical Services Estimate

Tell us about your project and we’ll get right back to you.

House Rewiring in Older Houston Homes

Houston's older neighborhoods are full of houses wearing their original wiring. The Heights and Montrose bungalows date to the early 1900s, and postwar ranch homes fill Oak Forest, Garden Oaks, and Meyerland. Wiring from those eras was sized for a radio and a few lamps. It was never meant to carry a modern kitchen, big AC loads, and a wall of screens.

Age shows up in specific ways. Two-prong outlets mean the circuits have no ground. Homes wired between 1965 and 1973 can carry aluminum branch wiring, which CPSC research links to overheating at loose connections. Cloth-insulated wiring turns brittle, and the oldest houses can still hide knob and tube in the attic. Flickering lights, warm switch plates, and a breaker that keeps tripping are the everyday signs.

A rewire replaces those circuits with new copper wiring, grounded outlets, and GFCI protection where today's code requires it. The City of Houston requires an electrical permit for this work, and only registered master electricians can pull one. Our electricians handle the permit and meet the inspector. Rough wiring gets inspected before any wall closes.

The reason to hire a remodeling contractor for a rewire is what happens after that inspection. Rewiring a finished house means openings in nearly every room. Our own crew patches the drywall, matches the texture, and paints. An electrical-only company leaves that repair work to you.

Outlets, Switches, and Fixture Installation

Not every electrical job is a full rewire. Most calls are smaller: a bank of new outlets in a home office, switches that crackle, a dining room chandelier waiting in its box. Our electricians handle that list in a single visit when the scope allows. Small electrical work also rides along with remodeling projects at the best price, since the trades are already in the house.

Older homes never have enough outlets, because the code they were built under asked for so few. We add grounded outlets where you actually use them, on new circuits when the load calls for it. Kitchens, bathrooms, laundry areas, and outdoor plugs get GFCI protection to meet current code. Ungrounded two-prong outlets get real fixes, not just new faces.

Fixture installation covers the finish side of the trade. We hang chandeliers and pendants, swap builder lights for fixtures you picked, and install ceiling fans on fan-rated boxes. Recessed lighting goes in during remodels and as its own project. Undercabinet lighting is a regular add in our kitchen remodels.

Every fixture change is a chance to catch problems in the box behind it. Our electricians check the wiring they touch and flag what they find. Scorched insulation and loose connections get fixed, not covered up. That habit comes from working in old houses.

Underground Service and Bigger Electrical Projects

Some electrical projects reach past the walls. If your power still arrives on a line drooping across the yard, we can run it underground in conduit instead. Our crew handles the trenching, our electricians handle the wiring, and CenterPoint makes the final connection at the pole. The full picture of that work lives on our breaker box and service upgrade page.

New circuits are the other common request. A garage gym, a workshop with real tools, or an EV charger each want their own circuit, and sometimes a subpanel. We wire garage conversions regularly, and generator hookups come up after every storm season. Each of those loads gets checked against your panel before anything is promised.

Houston weather figures into the planning. Humidity is hard on outdoor connections, so exterior outlets get weather-rated boxes and in-use covers. After Beryl put much of the city in the dark in July 2024, generator inlet requests became routine. Wiring one safely means a transfer switch or interlock, never a cord run to a dryer outlet.

Every job, small or large, ends the same way: the work inspected where a permit applies, the walls closed, patched, and painted, and the panel labeled so you know what feeds what. One contractor, start to finish. Call (713) 828-3097 for a free estimate.

Kohler standby generator installed by the VCS crew at a Houston home Automatic transfer switch and conduit wired during a VCS generator install in Houston

Ready to get started?

Free, no-obligation estimates across Houston, inside Loop 610 and out.

(713) 828-3097
What You Can Expect

How a Job With VCS Construction Runs

From the first call to the last pass of the rake, here is how it goes.

1

Call or Send the Form

Tell us about the house and the project. We set a time to come see it, usually within a few days.

2

Free Estimate and Design Consult

We look at the space and the systems in person and talk through the plan. You get a real number before any work starts.

3

Plans, Permits, Build

Drawings get done, permits get pulled, and the build starts on a set schedule. We review progress with you week by week.

4

Finish Work and Final Walk

Our own crew does the sheetrock, trim and paint, then walks the finished job with you. The project ends when you sign off on it.

FAQ

Electrical Services Questions, Answered

Common questions about electrical services across Houston, inside Loop 610 and out. Don't see yours? Give us a call and ask.

Call (713) 828-3097

How much does it cost to rewire a house in Houston?
Size drives the number. Angi's 2026 cost guide puts rewiring at about $2 to $4 per square foot with labor and materials, which lands a 2,500 square foot home around $5,000 to $10,500. Accessible attics and crawl spaces keep labor down, and a panel upgrade adds to the total. Drywall repair is the hidden line in most bids, and our estimate includes it.
Do I need a permit for electrical work in Houston?
Rewiring, new circuits, and service changes need a City of Houston electrical permit, and only registered master electricians can pull one. The permit brings a city inspection of the rough wiring before the walls close. We handle the paperwork and meet the inspector as part of the job. If a small job needs no permit, we will say so at the estimate.
My house still has two-prong outlets. What are my options?
Two-prong outlets mean ungrounded circuits, common in Houston homes built before the 1960s. The clean fix is running new grounded wiring to those locations, and a whole house rewire does it everywhere at once. Code also allows a GFCI outlet, marked as ungrounded, as a replacement that adds shock protection without a ground. We will tell you which fix fits your house and your budget after a look.
Can you add outlets without tearing up my walls?
Often, yes. An attic above or a crawl space below gives our electricians a path to fish cable through small, patchable openings. Single-story homes and pier and beam houses are the best cases. Second-story walls on a slab home are the hardest, and we say so up front. Either way, we cut carefully, and our own crew patches and paints whatever we open.
Do you handle small electrical jobs, or only big projects?
Both. Our electricians take on single-visit work like new outlets, switch replacements, and fixture installation across our Houston service area. Small jobs also pair well with remodels, since the trades are already on site. If walls are open for a kitchen or bath project, that is the cheapest time to add circuits. Call and tell us the list.
More From VCS

Explore Our Other Services

Kitchen Remodeling in Houston, TX

Kitchen Remodeling

We remodel kitchens across Houston, from Heights bungalows to postwar ranch homes. One contractor handles design, structure, trades, and finish work on every job.

View Details
Bathroom Remodeling in Houston, TX

Bathroom Remodeling

We remodel bathrooms across Houston, from 1920s bungalows in the Heights to newer homes outside the Loop. Our master plumbers and our own finish crew take each bath from demo to paint.

View Details
Home Additions in Houston, TX

Home Additions

We design and build home additions across Houston, from room additions to full second stories. One contractor takes your project from plans and permits through paint.

View Details
Custom Homes in Houston, TX

Custom Homes

We build custom homes from the ground up on lots across Houston, inside Loop 610 and out. Bring the lot, and our crew carries the build from dirt to finish-out.

View Details
Garage Conversions in Houston, TX

Garage Conversions

We convert Houston garages into gyms, home offices, man caves, and finished bonus rooms. Free estimates and design consultations at (713) 828-3097.

View Details
Why Choose VCS

Why Houston Homeowners Call Us

One Contractor, Start to Finish

The team that opens your walls is the team that closes them. Trades, sheetrock, tile, cabinets, trim and paint all run under one contract, so nothing falls between companies.

Master Plumbers On the Team

Repipes, sewer lines, water heaters and remodel plumbing stay in house. That is rare for a remodeling contractor, and it is why pipe problems do not stall our jobs.

Design-Build Under One Roof

An architect, two engineers and interior designers work with us on plans, or we build from your designer’s drawings. Permits and city inspections are handled for you.

Built for Houston Houses

Pier and beam bungalows, slab ranches on clay soil, galvanized pipe, cast iron drains, deed restrictions and flood maps. We have worked these streets since 2007 and plan for all of it.

Guides & Resources

Electrical Services Guides

Ready to Start Your Project?

Get In Touch With VCS Construction

A kitchen that needs to open up, a bath past its prime, an addition, or pipes that are done? Call or send the form. We come to look at the house in person, and the estimate and design consultation are free.

Get a Free Estimate

Tell us about your project and we’ll get right back to you.